Is the fan welded onto the pully? How can i remove the fan?
Modérateur : Modérateurs
- routenational6
- graisse les pivots...
- Messages : 36
- Enregistré le : dimanche 12 févr. 2006 15:50
- Localisation : Beaune
Is the fan welded onto the pully? How can i remove the fan?
Today i tried to remove my fan as hear in Beaune (France) its quite cold.
The fan seems to be welded onto the pully? If it is then where can i find just a pully.
Where dose the forum recomend to buy spare parts ??
The fan seems to be welded onto the pully? If it is then where can i find just a pully.
Where dose the forum recomend to buy spare parts ??
- routenational6
- graisse les pivots...
- Messages : 36
- Enregistré le : dimanche 12 févr. 2006 15:50
- Localisation : Beaune
- fa_
- 'serial (im)posteur...'
- Messages : 7112
- Enregistré le : mardi 07 sept. 2004 13:04
you'll find a few sellers here:
http://landmania.com/Shopping-index-req ... cid-5.html
and on this forum, "takeo" and "annette" are parts reseller (very good for genuine series parts)
http://landmania.com/Shopping-index-req ... cid-5.html
and on this forum, "takeo" and "annette" are parts reseller (very good for genuine series parts)
--
François
... .... ...
.
François
... .... ...
.
-
- 'aboie, mais ne mord pas !'
- Messages : 434
- Enregistré le : dimanche 19 sept. 2004 21:54
- Localisation : Dans les vignes et dans le Parc du Morvan
- fa_
- 'serial (im)posteur...'
- Messages : 7112
- Enregistré le : mardi 07 sept. 2004 13:04
Je ne crois pas qu'il cherche spécifiquement une piece pour son ventilo, il a un souci de ventilo collé a la poulier, et accessoirement il pose la question de savoir ou acheter des pieces en france.
Route6, Kopov suggests you to contact
Technoland in SAINT VALLIER
near Montceau les Mines
Tel 06 81 31 73 72
It's 60 kms away from Beaunes
Route6, Kopov suggests you to contact
Technoland in SAINT VALLIER
near Montceau les Mines
Tel 06 81 31 73 72
It's 60 kms away from Beaunes
--
François
... .... ...
.
François
... .... ...
.
- routenational6
- graisse les pivots...
- Messages : 36
- Enregistré le : dimanche 12 févr. 2006 15:50
- Localisation : Beaune
- fa_
- 'serial (im)posteur...'
- Messages : 7112
- Enregistré le : mardi 07 sept. 2004 13:04
We are used to mixing french english and other strange ways to tell things
Concerning Annette, here is here commercial website:
http://www.landroverclub.net/data/index.htm
Concerning Annette, here is here commercial website:
http://www.landroverclub.net/data/index.htm
--
François
... .... ...
.
François
... .... ...
.
- routenational6
- graisse les pivots...
- Messages : 36
- Enregistré le : dimanche 12 févr. 2006 15:50
- Localisation : Beaune
Thats great! I know her but i had no idea she was now in France!
Who is , "takeo"? is there a site for as well?? So many questions on a sunday!!
Any suggestions where i might look for an overdrive, not new!!
Just incase you retern, i want to send a "Valentine" card in French, without that person thinking its not from someone French. The French should be perfect!
How would i say "To my valentine so close in our small villages where nothing remains a secrect"?
OR Just "i wish you a good valentine and am thinking of you my valentine"
or somthing valentine I always tell her that in a French village everyone knows everything!!!
Or less complicated: a short valentines message in French! Thanks in case!!
Who is , "takeo"? is there a site for as well?? So many questions on a sunday!!
Any suggestions where i might look for an overdrive, not new!!
Just incase you retern, i want to send a "Valentine" card in French, without that person thinking its not from someone French. The French should be perfect!
How would i say "To my valentine so close in our small villages where nothing remains a secrect"?
OR Just "i wish you a good valentine and am thinking of you my valentine"
or somthing valentine I always tell her that in a French village everyone knows everything!!!
Or less complicated: a short valentines message in French! Thanks in case!!
Modifié en dernier par routenational6 le dimanche 12 févr. 2006 20:14, modifié 1 fois.
- stef71
- 'le garage de Marie...'
- Messages : 1479
- Enregistré le : jeudi 16 sept. 2004 18:37
hello RN6
Fine to meet you next time....!
if you go sometimes to south, near Macon, at 6 kms far east, near Replonges, you can found "pieces occase 4x4", swiss spécialist series and V8 parts".... 03 85 31 67 45 or 06 32 56 29 79....
and if you're coming, please send me a mp....i'm near Macon in beaujolais... we would together...with ou series !
Fine to meet you next time....!
if you go sometimes to south, near Macon, at 6 kms far east, near Replonges, you can found "pieces occase 4x4", swiss spécialist series and V8 parts".... 03 85 31 67 45 or 06 32 56 29 79....
and if you're coming, please send me a mp....i'm near Macon in beaujolais... we would together...with ou series !
l'excès de modération nuit à la consommation...
- routenational6
- graisse les pivots...
- Messages : 36
- Enregistré le : dimanche 12 févr. 2006 15:50
- Localisation : Beaune
Yes i will! In a few weeks when my current landys compleated!
If the "swiss" landy parts is Swiss arnt they very expensive???Generally the prices are somewhat inflated there.
Beaujolais! Last time i was there i went with a freind from just south of villefranche to buy wine! It was good!! nothing like the intermarche wine at all!! I really look forward it visiting.
I will call that number in case he has a bonnet overdrive FWHs tyers!!If he has i may be down soon!!!
Will you be doing the rallys and greenlaneing?
My best regards
- stef71
- 'le garage de Marie...'
- Messages : 1479
- Enregistré le : jeudi 16 sept. 2004 18:37
the "swiss shoper" sell a lot of used parts....
what would you mean about "Will you be doing the rallys and greenlaneing?" ?my serie is my principal car it 's working every day.....i'm in St amour (10 kms west south of Macon), and we work every week ends (B and B)!
so
if you're coming.... 03 85 36 51 90 or mail
what would you mean about "Will you be doing the rallys and greenlaneing?" ?my serie is my principal car it 's working every day.....i'm in St amour (10 kms west south of Macon), and we work every week ends (B and B)!
so
if you're coming.... 03 85 36 51 90 or mail
l'excès de modération nuit à la consommation...
- routenational6
- graisse les pivots...
- Messages : 36
- Enregistré le : dimanche 12 févr. 2006 15:50
- Localisation : Beaune
- landyman
- Jurassic Park
- Messages : 3170
- Enregistré le : samedi 12 juin 2004 16:48
- Localisation : Aveyron...
In the future, not so many questions in a same post !!!routenational6 a écrit :Thats great! I know her but i had no idea she was now in France!
Who is , "takeo"? is there a site for as well?? So many questions on a sunday!!
Any suggestions where i might look for an overdrive, not new!!
Just incase you retern, i want to send a "Valentine" card in French, without that person thinking its not from someone French. The French should be perfect!
How would i say "To my valentine so close in our small villages where nothing remains a secrect"?
OR Just "i wish you a good valentine and am thinking of you my valentine"
or somthing valentine I always tell her that in a French village everyone knows everything!!!
Or less complicated: a short valentines message in French! Thanks in case!!
About "valentine", i hope the message is not to be sent to "Annette", otherwise you'll soon understand who "Takeo" is....
For your valentine message, i would say "Maintenant, tout le monde saura que je pense à toi pour la St Valentin ! Je t'embrasse, Robbie"
that can be translated as "Everybody will know i've been thinking of you on valentine's day, now ! Kisses, Robbie"
You can copy this, but without the 'Robbie' mention of course...
(to be honest i've been thinking of writing something really rude... but that would be unfair... )
Plat devant, plat derrière, plat sur les cotés, plat dessus, et gras dessous...
quatre roues, mais toutes motrices !!!
"Helen" - SIIA - 1969
"Nothing better than the real thing..."
quatre roues, mais toutes motrices !!!
"Helen" - SIIA - 1969
"Nothing better than the real thing..."
- routenational6
- graisse les pivots...
- Messages : 36
- Enregistré le : dimanche 12 févr. 2006 15:50
- Localisation : Beaune